| |
 | South Wales Marine can provide a mobile rigging service, conducting work at your yacht or boat berth.
Manufacture and install shrouds and stays to your requirements, with both swaged and swageless terminals.
Supply over length wire with Swaged Terminal on one end only, for self installation using Sta-lok Swageless Terminals.
Undertake masthead inspections of fittings and rigging.
Tune your yacht rigging (2.5 to 10mm), in harbour only.
Manufacture and install Guard Rail assemblies with Talurit or Roll Swaged Terminals
Supply and install halyards/sheets, Mooring lines and Anchor Warps to your specifications.
Supply replacement or custom made Masts, Booms, Vangs, Spinnaker Poles & Mast system fittings. |
|
Please click on the links below to move to the subject of interest. |
|
| |
| |
We can splice 3 strand, Multiplait and Braid on Braid.
Our Splicing Service includes Back splice, Short splice, Long splice, Cut splice, Soft Eye splice, and Hard Eye splice with either a Stainless Steel Thimble, Galvanized Thimble or a NylonThimble.
Splices can be used for Mooring Lines, Halyards & Sheets, Anchor Warps, Tow Lines, ETC
A SPLICE WILL ONLY REDUCE BREAKING LOAD BY APPROXIMATELY 10%
A BOWLINE WILL REDUCE BREAKING LOAD BY UP TO 40%
We can splice rope to chain for Anchor Warps in both 3 strand and multiplait,
or include a snap shackle on halyard splices. |
|
| |
We can supply ropes for Nautical Themes or garden fence rope including decorative rope ends and knots.
Please contact us with your requirements for a quote.
|
|
 | Our portable Roll Swaging machine means we can conduct work at our work shop or on site.
We are able of swage up to 8mm wire on site, but have the capability of swaging larger size wires. Swaging Terminals include: Fork and Swage Rigging Screw, Toggle and Swage Rigging Screw, Swage and Swage Rigging Screw, Swaged Threaded Stud, Swaged Eye Terminal, Swaged Fork Terminal, Swaged 'T' Terminal, Swaged Toggle Terminal and Swaged Ball Terminals. |
|
Examples of Roll Press Swaged Terminals These examples show from the top, down:
A Swage & Fork terminal with Turnbuckle
A Swaged Universal 'T' Terminal
A Swaged Fork Terminal
All of these have been swaged onto 1 x 19 Stainless Steel Wire Rope (As used for Standing Rigging)
|  |
|
 | Shrouds and Stays We can provide Made to Measure or Over Length Stays and Shrouds.
These can be made up either on site or at our workshop.
Over length wires can be swaged one end, and self installation using Sta-Lok swageless terminals fitted the other.
Please contact us with your requirements for a quote. |
|
Guard Rail Replacement We can supply made to measure replacement swaged wire Guard Rails.
Work can be conducted at our workshop or on site.
A wide range of terminations available including:
Roll Swage Eye
Roll Swage Fork
Roll Swage Stud - for connecting to Pelican Hook or Life Line Oval Eye. |
|
Architectural Rigging South Wales Marine can manufcture and supply bespoke architectural wire Balustrades.
Ideal for fencing around garden decking or as stair balustrade.
Image shows work conducted on the Norweigian Church in the SA1 development at Swansea.
A wide range of terminations are available, please contact us with your requirements. |  |
|
| |
 | Our portable, 30 ton, TALURIT Press Swaging machine again means that work can be conducted either at our work shop or on site.
We are able to single stage swaging up to 8mm diameter wire, and multi-stage press 10mm wire on site.
We are also capable of swaging larger wire sizes off site.
Primarily used for pressing 7 x 19 Stainless Steel wire for Running Rigging.
We are also capable of Galvanised wire presses for Tow wires, Winch wires, Garage door wire, and Fence wiring.
|
|
Talurit Examples We can provide Made to Measure or over length wires.
These can be made up either on site or at our workshop.
Talurit swages can be used for Running Rigging, Guardrail Wires, Winch Wires, Bridles, Fencing and Garage Door Wire.
Please contact us with your requirements for a quote. |  |
|
| |
 | We can supply and install Swageless Terminations including STA-LOK and Norseman.
The installation require only a few basic tools without the need for specialist machines.
Swageless terminations can be reused when renewing your rigging, requiring only a new Wedge and Former.
For all enquiries about these, please contact us for a quotation. |
|
| |
We can supply a wide range of Selden, Z Spars and Sparcraft masts, booms, poles and fittings.
For all enquiries about these, please contact us for a quotation. |
|
| |
| |
| |
 | South Wales Marine are now suppliers for all Harken Products including:
- Carbo AirBlocks, Classic Blocks & Big Boat Blocks.
- Travelers & Genoa Leads.
- Headsail Handling Systems.
- Main Sail Handling Systems.
- Standard, Powered, Classic, Racing & Racing Quattro Winches.
- Complimentary Hardware.
|
|
| |
| |
We can manufacture bell ropes for yachts, boats, ships, clubs, restaurants and pubs.
We can also undertake bespoke decorative rope work with a nautical theme for any of the above, as well as a natural look to your garden.
Please contact us with any enquiries about this service. |
|
| |
| |
 | Over the last year or so we have been approached by more and more Arborists and Climbers asking if we can supply them.
We started off tentatively with the odd Beal Bonsai rope here and bull rope there, but it became apparent that we should look more into this.
So we are pleased to announce that we have recently concluded talks with three major suppliers of Arborist Equipment here in the UK. We are now able to supply: Yale, New England and Beal climbing and bull ropes, as well as Petzl and DMM hardware. |
|
Some of our staff are trained in climbing techniques, and have a good understanding of dynamic and static ropes and their associated hardware, so we should be able to answer your climbing and Arborist questions. However if we can't, then we know a man who can.
|
|
| |
| |
