South Wales Marine Galvanised Wire Rope Grips

Rope

Rigging

Anchoring & Mooring

Fastenings

Marine Safety Equipment

Ready Made Warps & Lines

Architectural Rope and Rigging

Arborist Equipment

Buying Guides and Other Information

Online catalogue > Rigging > Miscellaneous Galvanized Rigging Hardware > Galvanised Wire Rope Grips

Galvanised Wire Rope Grips

IMPORTANT NOTES on assembly and use of Wire Rope Grips

1. Prior to fitting, the threads on the nuts and U bolts should be well greased.
2. The spacing between grips should be at least 6 times the diameter of the wire.
3. Ensure the grips are correctly orientated. The U bolt should always be placed on the UNLOADED end of the wire.
4. Leave UNLOADED for 24 Hours and check torque setting again. In some cases, a 50% loss of torque has been recorded over this period. Re-tighten to correct torque.
5. After first application of the load, check the torque setting again. Re-setif necessary.
7. During service, ensure periodic checking of the torque setting.

Discounts & Payment

5% over £250 : 7% over £500 : 10% over £1000 : 12% over £1500

Payment may be by PayPal through this shop, or via telephone using major Credit and Debit Cards or by mail with a cheque.

3mm Galvanised Wire Rope Grip Ref: RIRG0303

Price: £0.15 (Including: VAT at 17.5%)

Quantity:

5mm Galvanised Wire Rope Grip Ref: RIRG0305

Price: £0.20 (Including: VAT at 17.5%)

OUT OF STOCK

6.5mm Galvanised Wire Rope Grip Ref: RIRG0306

Price: £0.25 (Including: VAT at 17.5%)

Quantity:

CAN'T FIND WHAT YOU'RE AFTER !

Online catalogue > Rigging > Miscellaneous Galvanized Rigging Hardware > Galvanised Wire Rope Grips

South Wales Marine are VAT Registered - Reg No 931 0912 52

If you cannot find the product you are looking for, or you would like to buy using another payment method then please contact us using the link above, or telephone:(01792) 463000, and we shall endeavour to meet your requirements.